Original Seal Savers – Fork Seal Covers

Fork Tube Diameter	Type of Bike	Available Colors
1 1/8 inch (fits up to 31mm fork tube)	Cobra and other 50cc bikes	black, blue, red
1 1/4 inch (32 – 35mm fork tube)	KTM, Polini, Kawasaki LEM, HM and other 50cc through 65cc bikes	black, blue, red, gold, orange, grey, yellow, green,
1 1/2 inch (36 – 43mm fork tube)	Most 80cc bikes	black, blue, red, gold, orange, grey, yellow,
1 3/4 inch (44 – 50mm fork tube)	Most 125cc through 500+cc bikes	black, blue, red, gold, orange, grey

SealSavers are a revolutionary design that act as a pre-wipe, wiping away and dirt, dust and mud that has accumulated onto the forks, preventing it from getting into your for seals as your forks compress while you are riding. These fork seal savers are a durable and washable fork cover that will not affect your fork damping or preload and will not affect the performance of your suspension. To install on your motorcycle, remove the front tire and take the forks out of the triple clamps, then just slide the fork cover on the fork tube and cover the seals, then keep it in place with the provided zip ties.

SOLD IN PAIRS

Benefits of Seal Savers Fork Covers

The SealSavers keep dust, dirt and mud from getting into your fork seals causing the seal to tear, preventing to fork to work properly and ultimately need replaced.
Fork seal covers that are durable and washable in addition to being easy to install.
SealSavers do not affect your fork damping but will extend the life of your fork seals.
No need to remove your SealSavers, just keep them on in order to keep your fork seals protected.
SealSavers are sold in pairs and finally are available in multiple colors.

Tips for Using Seal Savers Fork Covers

When washing your bike, flip up the bottom side of the SealSavers to wash any small amount of dirt that has gathered. Be sure to flip the SealSavers back down before they dry.
Lastly, there is the circlip around the larger for tube, take a flat head screwdriver and pop that off. Place the zip-tie where that was to allow the fork guard to rub on the zip-tie and not on the SealSavers.
Most importantly, apply the zip tie to the largest portion of the fork tube so that the fork guard rubs on the zip-tie as opposed to the SealSavers to prevent tears in the SealSavers.